AbstractDocument
Class AbstractDocument
- java.lang.Object
-
- javax.swing.text.AbstractDocument
- All Implemented Interfaces:
- Serializable, Document
- Direct Known Subclasses:
- DefaultStyledDocument, PlainDocument
public abstract class AbstractDocument extends Object implements Document, Serializable
An implementation of the document interface to serve as a basis for implementing various kinds of documents. At this level there is very little policy, so there is a corresponding increase in difficulty of use.
This class implements a locking mechanism for the document. It allows multiple readers or one writer, and writers must wait until all observers of the document have been notified of a previous change before beginning another mutation to the document. The read lock is acquired and released using the render
method. A write lock is acquired by the methods that mutate the document, and are held for the duration of the method call. Notification is done on the thread that produced the mutation, and the thread has full read access to the document for the duration of the notification, but other readers are kept out until the notification has finished. The notification is a beans event notification which does not allow any further mutations until all listeners have been notified.
Any models subclassed from this class and used in conjunction with a text component that has a look and feel implementation that is derived from BasicTextUI may be safely updated asynchronously, because all access to the View hierarchy is serialized by BasicTextUI if the document is of type AbstractDocument
. The locking assumes that an independent thread will access the View hierarchy only from the DocumentListener methods, and that there will be only one event thread active at a time.
If concurrency support is desired, there are the following additional implications. The code path for any DocumentListener implementation and any UndoListener implementation must be threadsafe, and not access the component lock if trying to be safe from deadlocks. The repaint
and revalidate
methods on JComponent are safe.
AbstractDocument models an implied break at the end of the document. Among other things this allows you to position the caret after the last character. As a result of this, getLength
returns one less than the length of the Content. If you create your own Content, be sure and initialize it to have an additional character. Refer to StringContent and GapContent for examples of this. Another implication of this is that Elements that model the implied end character will have an endOffset == (getLength() + 1). For example, in DefaultStyledDocument getParagraphElement(getLength()).getEndOffset() == getLength() + 1
.
Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeans™ has been added to the java.beans
package. Please see XMLEncoder
.
Nested Classes
Modifier and Type | Class and Description |
---|---|
class |
AbstractDocument.AbstractElement Implements the abstract part of an element. |
static interface |
AbstractDocument.AttributeContext An interface that can be used to allow MutableAttributeSet implementations to use pluggable attribute compression techniques. |
class |
AbstractDocument.BranchElement Implements a composite element that contains other elements. |
static interface |
AbstractDocument.Content Interface to describe a sequence of character content that can be edited. |
class |
AbstractDocument.DefaultDocumentEvent Stores document changes as the document is being modified. |
static class |
AbstractDocument.ElementEdit An implementation of ElementChange that can be added to the document event. |
class |
AbstractDocument.LeafElement Implements an element that directly represents content of some kind. |
Fields
listenerList
protected EventListenerList listenerList
The event listener list for the document.
BAD_LOCATION
protected static final String BAD_LOCATION
Error message to indicate a bad location.
ParagraphElementName
public static final String ParagraphElementName
Name of elements used to represent paragraphs
ContentElementName
public static final String ContentElementName
Name of elements used to represent content
SectionElementName
public static final String SectionElementName
Name of elements used to hold sections (lines/paragraphs).
BidiElementName
public static final String BidiElementName
Name of elements used to hold a unidirectional run
ElementNameAttribute
public static final String ElementNameAttribute
Name of the attribute used to specify element names.
Constructors
AbstractDocument
protected AbstractDocument(AbstractDocument.Content data)
Constructs a new AbstractDocument
, wrapped around some specified content storage mechanism.
- Parameters:
-
data
- the content
AbstractDocument
protected AbstractDocument(AbstractDocument.Content data, AbstractDocument.AttributeContext context)
Constructs a new AbstractDocument
, wrapped around some specified content storage mechanism.
- Parameters:
-
data
- the content -
context
- the attribute context
Methods
getDocumentProperties
public Dictionary<Object,Object> getDocumentProperties()
Supports managing a set of properties. Callers can use the documentProperties
dictionary to annotate the document with document-wide properties.
- Returns:
- a non-
null
Dictionary
- See Also:
setDocumentProperties(java.util.Dictionary<java.lang.Object, java.lang.Object>)
setDocumentProperties
public void setDocumentProperties(Dictionary<Object,Object> x)
Replaces the document properties dictionary for this document.
- Parameters:
-
x
- the new dictionary - See Also:
getDocumentProperties()
fireInsertUpdate
protected void fireInsertUpdate(DocumentEvent e)
Notifies all listeners that have registered interest for notification on this event type. The event instance is lazily created using the parameters passed into the fire method.
- Parameters:
-
e
- the event - See Also:
EventListenerList
fireChangedUpdate
protected void fireChangedUpdate(DocumentEvent e)
Notifies all listeners that have registered interest for notification on this event type. The event instance is lazily created using the parameters passed into the fire method.
- Parameters:
-
e
- the event - See Also:
EventListenerList
fireRemoveUpdate
protected void fireRemoveUpdate(DocumentEvent e)
Notifies all listeners that have registered interest for notification on this event type. The event instance is lazily created using the parameters passed into the fire method.
- Parameters:
-
e
- the event - See Also:
EventListenerList
fireUndoableEditUpdate
protected void fireUndoableEditUpdate(UndoableEditEvent e)
Notifies all listeners that have registered interest for notification on this event type. The event instance is lazily created using the parameters passed into the fire method.
- Parameters:
-
e
- the event - See Also:
EventListenerList
getListeners
public <T extends EventListener> T[] getListeners(Class<T> listenerType)
Returns an array of all the objects currently registered as FooListener
s upon this document. FooListener
s are registered using the addFooListener
method.
You can specify the listenerType
argument with a class literal, such as FooListener.class
. For example, you can query a document d
for its document listeners with the following code:
DocumentListener[] mls = (DocumentListener[])(d.getListeners(DocumentListener.class));If no such listeners exist, this method returns an empty array.
- Parameters:
-
listenerType
- the type of listeners requested; this parameter should specify an interface that descends fromjava.util.EventListener
- Returns:
- an array of all objects registered as
FooListener
s on this component, or an empty array if no such listeners have been added - Throws:
-
ClassCastException
- iflistenerType
doesn't specify a class or interface that implementsjava.util.EventListener
- Since:
- 1.3
- See Also:
-
getDocumentListeners()
,getUndoableEditListeners()
getAsynchronousLoadPriority
public int getAsynchronousLoadPriority()
Gets the asynchronous loading priority. If less than zero, the document should not be loaded asynchronously.
- Returns:
- the asynchronous loading priority, or
-1
if the document should not be loaded asynchronously
setAsynchronousLoadPriority
public void setAsynchronousLoadPriority(int p)
Sets the asynchronous loading priority.
- Parameters:
-
p
- the new asynchronous loading priority; a value less than zero indicates that the document should not be loaded asynchronously
setDocumentFilter
public void setDocumentFilter(DocumentFilter filter)
Sets the DocumentFilter
. The DocumentFilter
is passed insert
and remove
to conditionally allow inserting/deleting of the text. A null
value indicates that no filtering will occur.
- Parameters:
-
filter
- theDocumentFilter
used to constrain text - Since:
- 1.4
- See Also:
getDocumentFilter()
getDocumentFilter
public DocumentFilter getDocumentFilter()
Returns the DocumentFilter
that is responsible for filtering of insertion/removal. A null
return value implies no filtering is to occur.
- Returns:
- the DocumentFilter
- Since:
- 1.4
- See Also:
setDocumentFilter(javax.swing.text.DocumentFilter)
render
public void render(Runnable r)
This allows the model to be safely rendered in the presence of currency, if the model supports being updated asynchronously. The given runnable will be executed in a way that allows it to safely read the model with no changes while the runnable is being executed. The runnable itself may not make any mutations.
This is implemented to acquire a read lock for the duration of the runnables execution. There may be multiple runnables executing at the same time, and all writers will be blocked while there are active rendering runnables. If the runnable throws an exception, its lock will be safely released. There is no protection against a runnable that never exits, which will effectively leave the document locked for it's lifetime.
If the given runnable attempts to make any mutations in this implementation, a deadlock will occur. There is no tracking of individual rendering threads to enable detecting this situation, but a subclass could incur the overhead of tracking them and throwing an error.
This method is thread safe, although most Swing methods are not. Please see Concurrency in Swing for more information.
getLength
public int getLength()
Returns the length of the data. This is the number of characters of content that represents the users data.
- Specified by:
-
getLength
in interfaceDocument
- Returns:
- the length >= 0
- See Also:
Document.getLength()
addDocumentListener
public void addDocumentListener(DocumentListener listener)
Adds a document listener for notification of any changes.
- Specified by:
-
addDocumentListener
in interfaceDocument
- Parameters:
-
listener
- theDocumentListener
to add - See Also:
Document.addDocumentListener(javax.swing.event.DocumentListener)
removeDocumentListener
public void removeDocumentListener(DocumentListener listener)
Removes a document listener.
- Specified by:
-
removeDocumentListener
in interfaceDocument
- Parameters:
-
listener
- theDocumentListener
to remove - See Also:
Document.removeDocumentListener(javax.swing.event.DocumentListener)
getDocumentListeners
public DocumentListener[] getDocumentListeners()
Returns an array of all the document listeners registered on this document.
- Returns:
- all of this document's
DocumentListener
s or an empty array if no document listeners are currently registered - Since:
- 1.4
- See Also:
-
addDocumentListener(javax.swing.event.DocumentListener)
,removeDocumentListener(javax.swing.event.DocumentListener)
addUndoableEditListener
public void addUndoableEditListener(UndoableEditListener listener)
Adds an undo listener for notification of any changes. Undo/Redo operations performed on the UndoableEdit
will cause the appropriate DocumentEvent to be fired to keep the view(s) in sync with the model.
- Specified by:
-
addUndoableEditListener
in interfaceDocument
- Parameters:
-
listener
- theUndoableEditListener
to add - See Also:
Document.addUndoableEditListener(javax.swing.event.UndoableEditListener)
removeUndoableEditListener
public void removeUndoableEditListener(UndoableEditListener listener)
Removes an undo listener.
- Specified by:
-
removeUndoableEditListener
in interfaceDocument
- Parameters:
-
listener
- theUndoableEditListener
to remove - See Also:
Document.removeDocumentListener(javax.swing.event.DocumentListener)
getUndoableEditListeners
public UndoableEditListener[] getUndoableEditListeners()
Returns an array of all the undoable edit listeners registered on this document.
- Returns:
- all of this document's
UndoableEditListener
s or an empty array if no undoable edit listeners are currently registered - Since:
- 1.4
- See Also:
-
addUndoableEditListener(javax.swing.event.UndoableEditListener)
,removeUndoableEditListener(javax.swing.event.UndoableEditListener)
getProperty
public final Object getProperty(Object key)
A convenience method for looking up a property value. It is equivalent to:
getDocumentProperties().get(key);
- Specified by:
-
getProperty
in interfaceDocument
- Parameters:
-
key
- the non-null
property key - Returns:
- the value of this property or
null
- See Also:
getDocumentProperties()
putProperty
public final void putProperty(Object key, Object value)
A convenience method for storing up a property value. It is equivalent to:
getDocumentProperties().put(key, value);If
value
is null
this method will remove the property. - Specified by:
-
putProperty
in interfaceDocument
- Parameters:
-
key
- the non-null
key -
value
- the property value - See Also:
getDocumentProperties()
remove
public void remove(int offs, int len) throws BadLocationException
Removes some content from the document. Removing content causes a write lock to be held while the actual changes are taking place. Observers are notified of the change on the thread that called this method.
This method is thread safe, although most Swing methods are not. Please see Concurrency in Swing for more information.
- Specified by:
-
remove
in interfaceDocument
- Parameters:
-
offs
- the starting offset >= 0 -
len
- the number of characters to remove >= 0 - Throws:
-
BadLocationException
- the given remove position is not a valid position within the document - See Also:
Document.remove(int, int)
replace
public void replace(int offset, int length, String text, AttributeSet attrs) throws BadLocationException
Deletes the region of text from offset
to offset + length
, and replaces it with text
. It is up to the implementation as to how this is implemented, some implementations may treat this as two distinct operations: a remove followed by an insert, others may treat the replace as one atomic operation.
- Parameters:
-
offset
- index of child element -
length
- length of text to delete, may be 0 indicating don't delete anything -
text
- text to insert,null
indicates no text to insert -
attrs
- AttributeSet indicating attributes of inserted text,null
is legal, and typically treated as an empty attributeset, but exact interpretation is left to the subclass - Throws:
-
BadLocationException
- the given position is not a valid position within the document - Since:
- 1.4
insertString
public void insertString(int offs, String str, AttributeSet a) throws BadLocationException
Inserts some content into the document. Inserting content causes a write lock to be held while the actual changes are taking place, followed by notification to the observers on the thread that grabbed the write lock.
This method is thread safe, although most Swing methods are not. Please see Concurrency in Swing for more information.
- Specified by:
-
insertString
in interfaceDocument
- Parameters:
-
offs
- the starting offset >= 0 -
str
- the string to insert; does nothing with null/empty strings -
a
- the attributes for the inserted content - Throws:
-
BadLocationException
- the given insert position is not a valid position within the document - See Also:
Document.insertString(int, java.lang.String, javax.swing.text.AttributeSet)
getText
public String getText(int offset, int length) throws BadLocationException
Gets a sequence of text from the document.
- Specified by:
-
getText
in interfaceDocument
- Parameters:
-
offset
- the starting offset >= 0 -
length
- the number of characters to retrieve >= 0 - Returns:
- the text
- Throws:
-
BadLocationException
- the range given includes a position that is not a valid position within the document - See Also:
Document.getText(int, int)
getText
public void getText(int offset, int length, Segment txt) throws BadLocationException
Fetches the text contained within the given portion of the document.
If the partialReturn property on the txt parameter is false, the data returned in the Segment will be the entire length requested and may or may not be a copy depending upon how the data was stored. If the partialReturn property is true, only the amount of text that can be returned without creating a copy is returned. Using partial returns will give better performance for situations where large parts of the document are being scanned. The following is an example of using the partial return to access the entire document:
int nleft = doc.getDocumentLength(); Segment text = new Segment(); int offs = 0; text.setPartialReturn(true); while (nleft > 0) { doc.getText(offs, nleft, text); // do something with text nleft -= text.count; offs += text.count; }
- Specified by:
-
getText
in interfaceDocument
- Parameters:
-
offset
- the starting offset >= 0 -
length
- the number of characters to retrieve >= 0 -
txt
- the Segment object to retrieve the text into - Throws:
-
BadLocationException
- the range given includes a position that is not a valid position within the document
createPosition
public Position createPosition(int offs) throws BadLocationException
Returns a position that will track change as the document is altered.
This method is thread safe, although most Swing methods are not. Please see Concurrency in Swing for more information.
- Specified by:
-
createPosition
in interfaceDocument
- Parameters:
-
offs
- the position in the model >= 0 - Returns:
- the position
- Throws:
-
BadLocationException
- if the given position does not represent a valid location in the associated document - See Also:
Document.createPosition(int)
getStartPosition
public final Position getStartPosition()
Returns a position that represents the start of the document. The position returned can be counted on to track change and stay located at the beginning of the document.
- Specified by:
-
getStartPosition
in interfaceDocument
- Returns:
- the position
getEndPosition
public final Position getEndPosition()
Returns a position that represents the end of the document. The position returned can be counted on to track change and stay located at the end of the document.
- Specified by:
-
getEndPosition
in interfaceDocument
- Returns:
- the position
getRootElements
public Element[] getRootElements()
Gets all root elements defined. Typically, there will only be one so the default implementation is to return the default root element.
- Specified by:
-
getRootElements
in interfaceDocument
- Returns:
- the root element
getDefaultRootElement
public abstract Element getDefaultRootElement()
Returns the root element that views should be based upon unless some other mechanism for assigning views to element structures is provided.
- Specified by:
-
getDefaultRootElement
in interfaceDocument
- Returns:
- the root element
- See Also:
Document.getDefaultRootElement()
getBidiRootElement
public Element getBidiRootElement()
Returns the root element of the bidirectional structure for this document. Its children represent character runs with a given Unicode bidi level.
getParagraphElement
public abstract Element getParagraphElement(int pos)
Get the paragraph element containing the given position. Sub-classes must define for themselves what exactly constitutes a paragraph. They should keep in mind however that a paragraph should at least be the unit of text over which to run the Unicode bidirectional algorithm.
- Parameters:
-
pos
- the starting offset >= 0 - Returns:
- the element
getAttributeContext
protected final AbstractDocument.AttributeContext getAttributeContext()
Fetches the context for managing attributes. This method effectively establishes the strategy used for compressing AttributeSet information.
- Returns:
- the context
insertUpdate
protected void insertUpdate(AbstractDocument.DefaultDocumentEvent chng, AttributeSet attr)
Updates document structure as a result of text insertion. This will happen within a write lock. If a subclass of this class reimplements this method, it should delegate to the superclass as well.
- Parameters:
-
chng
- a description of the change -
attr
- the attributes for the change
removeUpdate
protected void removeUpdate(AbstractDocument.DefaultDocumentEvent chng)
Updates any document structure as a result of text removal. This method is called before the text is actually removed from the Content. This will happen within a write lock. If a subclass of this class reimplements this method, it should delegate to the superclass as well.
- Parameters:
-
chng
- a description of the change
postRemoveUpdate
protected void postRemoveUpdate(AbstractDocument.DefaultDocumentEvent chng)
Updates any document structure as a result of text removal. This method is called after the text has been removed from the Content. This will happen within a write lock. If a subclass of this class reimplements this method, it should delegate to the superclass as well.
- Parameters:
-
chng
- a description of the change
dump
public void dump(PrintStream out)
Gives a diagnostic dump.
- Parameters:
-
out
- the output stream
getContent
protected final AbstractDocument.Content getContent()
Gets the content for the document.
- Returns:
- the content
createLeafElement
protected Element createLeafElement(Element parent, AttributeSet a, int p0, int p1)
Creates a document leaf element. Hook through which elements are created to represent the document structure. Because this implementation keeps structure and content separate, elements grow automatically when content is extended so splits of existing elements follow. The document itself gets to decide how to generate elements to give flexibility in the type of elements used.
- Parameters:
-
parent
- the parent element -
a
- the attributes for the element -
p0
- the beginning of the range >= 0 -
p1
- the end of the range >= p0 - Returns:
- the new element
createBranchElement
protected Element createBranchElement(Element parent, AttributeSet a)
Creates a document branch element, that can contain other elements.
- Parameters:
-
parent
- the parent element -
a
- the attributes - Returns:
- the element
getCurrentWriter
protected final Thread getCurrentWriter()
Fetches the current writing thread if there is one. This can be used to distinguish whether a method is being called as part of an existing modification or if a lock needs to be acquired and a new transaction started.
- Returns:
- the thread actively modifying the document or
null
if there are no modifications in progress
writeLock
protected final void writeLock()
Acquires a lock to begin mutating the document this lock protects. There can be no writing, notification of changes, or reading going on in order to gain the lock. Additionally a thread is allowed to gain more than one writeLock
, as long as it doesn't attempt to gain additional writeLock
s from within document notification. Attempting to gain a writeLock
from within a DocumentListener notification will result in an IllegalStateException
. The ability to obtain more than one writeLock
per thread allows subclasses to gain a writeLock, perform a number of operations, then release the lock.
Calls to writeLock
must be balanced with calls to writeUnlock
, else the Document
will be left in a locked state so that no reading or writing can be done.
- Throws:
-
IllegalStateException
- thrown on illegal lock attempt. If the document is implemented properly, this can only happen if a document listener attempts to mutate the document. This situation violates the bean event model where order of delivery is not guaranteed and all listeners should be notified before further mutations are allowed.
writeUnlock
protected final void writeUnlock()
Releases a write lock previously obtained via writeLock
. After decrementing the lock count if there are no outstanding locks this will allow a new writer, or readers.
- See Also:
writeLock()
readLock
public final void readLock()
Acquires a lock to begin reading some state from the document. There can be multiple readers at the same time. Writing blocks the readers until notification of the change to the listeners has been completed. This method should be used very carefully to avoid unintended compromise of the document. It should always be balanced with a readUnlock
.
- See Also:
readUnlock()
readUnlock
public final void readUnlock()
Does a read unlock. This signals that one of the readers is done. If there are no more readers then writing can begin again. This should be balanced with a readLock, and should occur in a finally statement so that the balance is guaranteed. The following is an example.
readLock(); try { // do something } finally { readUnlock(); }
- See Also:
readLock()
© 1993–2017, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.