RadialGradientPaint
Class RadialGradientPaint
- java.lang.Object
-
- java.awt.MultipleGradientPaint
-
- java.awt.RadialGradientPaint
- All Implemented Interfaces:
- Paint, Transparency
public final class RadialGradientPaint extends MultipleGradientPaint
The RadialGradientPaint
class provides a way to fill a shape with a circular radial color gradient pattern. The user may specify 2 or more gradient colors, and this paint will provide an interpolation between each color.
The user must specify the circle controlling the gradient pattern, which is described by a center point and a radius. The user can also specify a separate focus point within that circle, which controls the location of the first color of the gradient. By default the focus is set to be the center of the circle.
This paint will map the first color of the gradient to the focus point, and the last color to the perimeter of the circle, interpolating smoothly for any in-between colors specified by the user. Any line drawn from the focus point to the circumference will thus span all the gradient colors.
Specifying a focus point outside of the radius of the circle will cause the rings of the gradient pattern to be centered on the point just inside the edge of the circle in the direction of the focus point. The rendering will internally use this modified location as if it were the specified focus point.
The user must provide an array of floats specifying how to distribute the colors along the gradient. These values should range from 0.0 to 1.0 and act like keyframes along the gradient (they mark where the gradient should be exactly a particular color).
In the event that the user does not set the first keyframe value equal to 0 and/or the last keyframe value equal to 1, keyframes will be created at these positions and the first and last colors will be replicated there. So, if a user specifies the following arrays to construct a gradient:
{Color.BLUE, Color.RED}, {.3f, .7f}this will be converted to a gradient with the following keyframes:
{Color.BLUE, Color.BLUE, Color.RED, Color.RED}, {0f, .3f, .7f, 1f}
The user may also select what action the RadialGradientPaint
object takes when it is filling the space outside the circle's radius by setting CycleMethod
to either REFLECTION
or REPEAT
. The gradient color proportions are equal for any particular line drawn from the focus point. The following figure shows that the distance AB is equal to the distance BC, and the distance AD is equal to the distance DE.
NO_CYCLE
will be chosen by default, which means the the last keyframe color will be used to fill the remaining area. The colorSpace parameter allows the user to specify in which colorspace the interpolation should be performed, default sRGB or linearized RGB.
The following code demonstrates typical usage of RadialGradientPaint
, where the center and focus points are the same:
Point2D center = new Point2D.Float(50, 50); float radius = 25; float[] dist = {0.0f, 0.2f, 1.0f}; Color[] colors = {Color.RED, Color.WHITE, Color.BLUE}; RadialGradientPaint p = new RadialGradientPaint(center, radius, dist, colors);
This image demonstrates the example code above, with default (centered) focus for each of the three cycle methods:
It is also possible to specify a non-centered focus point, as in the following code:
Point2D center = new Point2D.Float(50, 50); float radius = 25; Point2D focus = new Point2D.Float(40, 40); float[] dist = {0.0f, 0.2f, 1.0f}; Color[] colors = {Color.RED, Color.WHITE, Color.BLUE}; RadialGradientPaint p = new RadialGradientPaint(center, radius, focus, dist, colors, CycleMethod.NO_CYCLE);
This image demonstrates the previous example code, with non-centered focus for each of the three cycle methods:
- Since:
- 1.6
- See Also:
-
Paint
,Graphics2D.setPaint(java.awt.Paint)
Nested Classes
Nested classes/interfaces inherited from class java.awt.MultipleGradientPaint
MultipleGradientPaint.ColorSpaceType, MultipleGradientPaint.CycleMethod
Fields
Fields inherited from interface java.awt.Transparency
BITMASK, OPAQUE, TRANSLUCENT
Constructors
RadialGradientPaint
public RadialGradientPaint(float cx, float cy, float radius, float[] fractions, Color[] colors)
Constructs a RadialGradientPaint
with a default NO_CYCLE
repeating method and SRGB
color space, using the center as the focus point.
- Parameters:
-
cx
- the X coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
cy
- the Y coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
radius
- the radius of the circle defining the extents of the color gradient -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. - Throws:
-
NullPointerException
- iffractions
array is null, orcolors
array is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(Point2D center, float radius, float[] fractions, Color[] colors)
Constructs a RadialGradientPaint
with a default NO_CYCLE
repeating method and SRGB
color space, using the center as the focus point.
- Parameters:
-
center
- the center point, in user space, of the circle defining the gradient -
radius
- the radius of the circle defining the extents of the color gradient -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. - Throws:
-
NullPointerException
- ifcenter
point is null, orfractions
array is null, orcolors
array is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(float cx, float cy, float radius, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
Constructs a RadialGradientPaint
with a default SRGB
color space, using the center as the focus point.
- Parameters:
-
cx
- the X coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
cy
- the Y coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
radius
- the radius of the circle defining the extents of the color gradient -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
- Throws:
-
NullPointerException
- iffractions
array is null, orcolors
array is null, orcycleMethod
is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(Point2D center, float radius, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
Constructs a RadialGradientPaint
with a default SRGB
color space, using the center as the focus point.
- Parameters:
-
center
- the center point, in user space, of the circle defining the gradient -
radius
- the radius of the circle defining the extents of the color gradient -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
- Throws:
-
NullPointerException
- ifcenter
point is null, orfractions
array is null, orcolors
array is null, orcycleMethod
is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(float cx, float cy, float radius, float fx, float fy, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
Constructs a RadialGradientPaint
with a default SRGB
color space.
- Parameters:
-
cx
- the X coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
cy
- the Y coordinate in user space of the center point of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
radius
- the radius of the circle defining the extents of the color gradient -
fx
- the X coordinate of the point in user space to which the first color is mapped -
fy
- the Y coordinate of the point in user space to which the first color is mapped -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
- Throws:
-
NullPointerException
- iffractions
array is null, orcolors
array is null, orcycleMethod
is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(Point2D center, float radius, Point2D focus, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
Constructs a RadialGradientPaint
with a default SRGB
color space.
- Parameters:
-
center
- the center point, in user space, of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
radius
- the radius of the circle defining the extents of the color gradient -
focus
- the point in user space to which the first color is mapped -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
- Throws:
-
NullPointerException
- if one of the points is null, orfractions
array is null, orcolors
array is null, orcycleMethod
is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
@ConstructorProperties(value={"centerPoint","radius","focusPoint","fractions","colors","cycleMethod","colorSpace","transform"}) public RadialGradientPaint(Point2D center, float radius, Point2D focus, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod, MultipleGradientPaint.ColorSpaceType colorSpace, AffineTransform gradientTransform)
Constructs a RadialGradientPaint
.
- Parameters:
-
center
- the center point in user space of the circle defining the gradient. The last color of the gradient is mapped to the perimeter of this circle. -
radius
- the radius of the circle defining the extents of the color gradient -
focus
- the point in user space to which the first color is mapped -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
-
colorSpace
- which color space to use for interpolation, eitherSRGB
orLINEAR_RGB
-
gradientTransform
- transform to apply to the gradient - Throws:
-
NullPointerException
- if one of the points is null, orfractions
array is null, orcolors
array is null, orcycleMethod
is null, orcolorSpace
is null, orgradientTransform
is null -
IllegalArgumentException
- ifradius
is non-positive, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
RadialGradientPaint
public RadialGradientPaint(Rectangle2D gradientBounds, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
Constructs a RadialGradientPaint
with a default SRGB
color space. The gradient circle of the RadialGradientPaint
is defined by the given bounding box.
This constructor is a more convenient way to express the following (equivalent) code:
double gw = gradientBounds.getWidth(); double gh = gradientBounds.getHeight(); double cx = gradientBounds.getCenterX(); double cy = gradientBounds.getCenterY(); Point2D center = new Point2D.Double(cx, cy); AffineTransform gradientTransform = new AffineTransform(); gradientTransform.translate(cx, cy); gradientTransform.scale(gw / 2, gh / 2); gradientTransform.translate(-cx, -cy); RadialGradientPaint gp = new RadialGradientPaint(center, 1.0f, center, fractions, colors, cycleMethod, ColorSpaceType.SRGB, gradientTransform);
- Parameters:
-
gradientBounds
- the bounding box, in user space, of the circle defining the outermost extent of the gradient -
fractions
- numbers ranging from 0.0 to 1.0 specifying the distribution of colors along the gradient -
colors
- array of colors to use in the gradient. The first color is used at the focus point, the last color around the perimeter of the circle. -
cycleMethod
- eitherNO_CYCLE
,REFLECT
, orREPEAT
- Throws:
-
NullPointerException
- ifgradientBounds
is null, orfractions
array is null, orcolors
array is null, orcycleMethod
is null -
IllegalArgumentException
- ifgradientBounds
is empty, orfractions.length != colors.length
, orcolors
is less than 2 in size, or afractions
value is less than 0.0 or greater than 1.0, or thefractions
are not provided in strictly increasing order
Methods
createContext
public PaintContext createContext(ColorModel cm, Rectangle deviceBounds, Rectangle2D userBounds, AffineTransform transform, RenderingHints hints)
Creates and returns a PaintContext
used to generate a circular radial color gradient pattern. See the description of the createContext
method for information on null parameter handling.
- Parameters:
-
cm
- the preferredColorModel
which represents the most convenient format for the caller to receive the pixel data, ornull
if there is no preference. -
deviceBounds
- the device space bounding box of the graphics primitive being rendered. -
userBounds
- the user space bounding box of the graphics primitive being rendered. -
transform
- theAffineTransform
from user space into device space. -
hints
- the set of hints that the context object can use to choose between rendering alternatives. - Returns:
- the
PaintContext
for generating color patterns. - See Also:
-
Paint
,PaintContext
,ColorModel
,Rectangle
,Rectangle2D
,AffineTransform
,RenderingHints
getCenterPoint
public Point2D getCenterPoint()
Returns a copy of the center point of the radial gradient.
- Returns:
- a
Point2D
object that is a copy of the center point
getFocusPoint
public Point2D getFocusPoint()
Returns a copy of the focus point of the radial gradient. Note that if the focus point specified when the radial gradient was constructed lies outside of the radius of the circle, this method will still return the original focus point even though the rendering may center the rings of color on a different point that lies inside the radius.
- Returns:
- a
Point2D
object that is a copy of the focus point
getRadius
public float getRadius()
Returns the radius of the circle defining the radial gradient.
- Returns:
- the radius of the circle defining the radial gradient
© 1993–2017, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.